The Yageo AT Series chip resistor, the AEC-Q200 qualified resistor offers superior anti-sulphur capability and a robust product design for high-temperature and high-humidity resistance, higher pulse load performance and it is developed to meet the market demand for stability, high precision and accuracy for electronic circuit design.
Abracon’s 10/100 Base-T single-port LAN transformers. The parts meet IEEE802.3 specification and features 1500Vrms Hi-Pot and an extended temperature of -40C to +85C.
The Murata NMUSB202MC dual-port USB data isolator. The surface-mount isolator provides an isolation barrier between a computer and two connected USB devices, helping to extend effective breaking of ground loops and immunity to electromagnetic interference (EMI) while allowing data transmission.
TDK-Epcos has launched two new series of MMKP capacitors which employ metallized film on both sides. The new capacitors offer particularly high pulse strength as well as a high current capability. Depending on the type and frequency, the permissible current can be up to more than 10Arms.
Maxim’s MAXM17516 is a high-efficiency step-down fixed frequency power module that operates from a 2.4V to 5.5V input supply voltage and supports output currents up to 6A. Combined in the thermally-efficient package is a switch-mode power-supply controller, dual n-channel MOSFET power switches, a fully shielded inductor, as well as compensation components.
CUI’s AMT31 series rugged, high-accuracy encoders are generating standard U/V/W signals for commutating brushless DC motors. The series is designed to address a number of challenges encountered in BLDC applications.
Vishay has announced that its RCP series of thick-film chip resistors for high-power, surface-mount RF applications is now available in the compact 0505, 0603, and 2512 case sizes. The Vishay Dale devices offer very high thermal conductivity for power ratings up to 22W with active temperature control.
Highly versatile energy-harvesting wireless switches for industrial applications from Cherry are now available in two standard versions: a rocker switch for actuation by hand or a snap-action switch for mechanical actuation typically by a machine as limit switch or position switch.
The new DMN2014LHAB and DMN2011UFX dual N-channel enhancement mode MOSFETs, from Diodes Incorporated, provide a compact, bi-directional low-loss switch for battery-charging circuits. End markets include chargers for portable devices such as smartphones, tablets, cameras and media players, which use 1-cell and 2-cell lithium batteries.
Cypress EZ-PD CCG2 USB Type-C controllers are complying with the latest USB Type-C and PD standards. Half the size of the first generation controllers, they feature reduced board space through integration.
Xsens has expanded its successful 4th-generation MTi product portfolio by releasing a new series of complete, self-contained 3D IMU/VRU/AHRS motion tracking modules for high-volume industrial and prosumer applications.
Fujitsu Semiconductor Europe (FSEU) has unveiled a new ultra-small package for its 1Mbit SPI FRAM device. The new 8-pin wafer level chip scale package (WL-CSP) is an additional package variant to the existing product MB85RS1MT.
Introduced as the industry’s first current-sense amplifier to integrate a high-precision, low-drift shunt resistor, the Texas Instruments (TI) INA250 can deliver highly-accurate measurements over a wide temperature range.
The Exar XRP6274 Series ultra low dropout voltage regulator which is capable of delivering 2A output currents and is ‘unique’ in the industry in being able to operate from a single supply rail of 1.045V to 2.625V without the need for a noise generating charge pump, says the company.
ALPS has developed the ATMJ1ZX7 Series bi-direction autofocus actuator for cameras – for integration into smartphone camera modules. The new product drives large-diameter lenses and realizes low power consumption. Mass production is already underway, says the company.
Rohm’s BD9A301MUV single synchronous DC-DC buck switching regulator with built-in low on-resistance power MOSFETs. The device provides a current up to 3A and its SLLM control provides exceptional efficiency characteristics in light-load conditions.
Kemet’s T591 Series high-performance automotive-grade polymer electrolytic capacitors deliver stability and endurance under harsh humidity and temperature conditions. Newcomers to the range include options up to 50V for both 12V and 24V power rails.
The TPS82085 from Texas Instruments (TI) is a 3A step-down converter MicroSiP module optimized for small solution size and high efficiency. The power module integrates a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area.