The Monolithic Power Systems MP2633A single-cell switch-mode battery charger, the highly-integrated and flexible battery charge and system power path management device is designed for single-cell Li-ion and Li-Polymer portable product battery systems.
Aimed at ultrasonic sensing measurements such as water flow meter, gas flow meter and heat flow meters, Texas Instruments has introduced the C7200 time to digital converter (TDC). When paired with the TDC1000 (ultrasonic analog-front-end), the TDC7200 can be a part of a complete TI ultrasonic sensing solution that includes the MSP430, power, wireless and source code.
TE Connectivity’s high-power inverted through-board SMT connectors provide a means to bring power to LED aluminium-clad boards from the underside of the printed circuit board.
Power Integrations has launched the 2SC0115T2A0-12 dual-channel gate-driver core for 90kW to 500kW inverters and converters. Exploiting SCALET-2+ integrated circuit and isolated transformer technology for DC-DC power and switching signal transmission, the new driver core improves system reliability and performance by eliminating the need for an opto-coupler.
Bel Power Solutions’ IMX7 7W DC-DC converters, the units are designed according to the latest industry requirements and standards and are ideal for use in mobile or stationary applications in transport, railways, industry, and telecom, where variable input voltages or high transient voltages are prevalent.
Altera has announced that Mitsubishi Electric selected its Cyclone V SoCs to power its next-generation of C controller for use in smart factory automation equipment. Cyclone V SoCs provide the C controller greater flexibility while delivering higher performance, increased functionality and enhanced network connectivity when compared to the previous generation’s microcontroller-based systems.
Aimed at smartphones operating from a single-cell lithium-ion battery, the PAM8905 from Diodes Incorporated is a new 1.9W Class-D audio amplifier designed for audio systems that need to deliver a high sound pressure level (SPL) output from a low supply voltage.
Applications such as smart phones, tablets and ultrabooks, Fairchild’s high-performance FSA551 dual single-pole single-throw (SPSTx2) audio switch. The device’s depletion-mode technology allows it to conduct signals when there is no VCC available and to isolate signals when VCC is present.
The DesignDRIVE kit and example software offer an easy path to begin exploring a wide variety of motor types, sensing technologies, encoder standards and communications networks, as well as easy expansion to develop with real-time Ethernet communications and functional safety topologies, enabling more comprehensive, integrated system solutions.
The NXP LPC800 series microcontroller, the devices feature the ultra-efficient 30MHz ARM Cortex-M0+ core, offering a range of low-power, space-efficient, low-pin-count options for basic diverse MCU applications.
Analog Devices’ ADA4571 anisotropic magnetoresistive (AMR) sensors with integrated signal conditioning amplifiers and ADC drivers, the ADA4571′s two analog outputs indicate the angular position of the surrounding magnetic field.
Maxim Integrated Products is addressing the need for higher throughput, smaller footprint, and lower power in industrial automation with its new MAX14900E digital output switch. This eight-channel integrated circuit (IC) provides up to 70x faster speed, uses over 20% less power, and occupies 40% less space than existing solutions—all factors required in today’s faster, more localized, smaller end products.
The Hirose Electric HR41A circular waterproof connector. The IP68-rated plastic-shelled connectors are designed to provide advanced reliability and high power use in a wide variety of harsh, outdoor environments. These include LED Lighting (tunnel lighting, street lamps, etc.), harsh-environment lighting such as industrial, construction sites, marine and agriculture, base station transceivers, robotics in wet environments and electronic toll systems
TDK has expanded its CCT series of clamp AC current sensors with two new types that are rated for 300A and 80A. The new sensors are designed for use in the power distribution panels in a variety of systems such as power distribution panels of energy-management systems (EMS) for homes, buildings, factories and stores (HEMS, BEMS, FEMS, SEMS)
Aimed at applications such as audio, measurement and detection, Traco Power’s TVN 5WI Series DC-DC converters, the modules feature a six side shielded metal package with ultra low ripple and noise. The conducted noise complies with EN 55022 class B.
Vishay/Dale IHLE-4040DC-5A Series automotive-grade high-current low-profile SMD inductors feature an integrated e-shield, when connected to ground which provides up to -20dB EMI reduction at 1cm.
IDT’s IDT5P49V5901 low-power programmable clock generator offers best-in-class jitter performance and design flexibility with universal outputs capable of generating any output frequency. It is intended for high-performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip one-time programmable (OTP) memory or changed using I²C interface.
TE Connectivity’s AMPMODU MTE interconnection system is aimed at wire-to-board and wire-to-wire applications, and can be found in many types of electronic equipment including computers, copiers, commercial printers, appliances, medical equipment and automotive controls. The product implements insulation displacement contacts (IDC) or crimp snap-in contacts to suit individual end-user needs.
